SS304 Diameter 1000mm Liquid Collector And Redistributor
1. liquid distributor
Hualai factory can help you make various types of liquid distributor. We can make the liquid distributor into almost any sizes, from 300mm, for example, to 9000 mm. The material available for trough liquid distributor include stainless steel 304, 304L, 316L, 410s, 2205, 2507, etc.
2. Hualai liquid collector and re-distributor brief view:
Tower internal Type | vapor distributor & chimney tray |
Tower diameter | ＞ 1000 mm |
Liquid Range | 20.5 - 100 m³/h/m² |
Support at Shell | Support ring and clips for major beams if the diameter is >3000 mm |
Construction type | Like a chimney tray it is designed in parts to pass through the column manway and to be installed together by welding or bolts and nuts. |
Design | The distributor is designed to generate a controlled pressure drop through the
chimneys that makes the vapor spreading across the entire section of the column.
Normally the design pressure drop ranges from 10 to 50 mm H2O |
Levelling method | The operation of this device is not affected by a possible out of levelness of the
support ring |
Applications | Typical application is below packed beds, to distibute the vapor and collect the liquid
to be drawn-off or redistributed to a lower bed |
3. Characteristics distributor:
1. Uniform liquid distribution;
2. Resistance to fouling
3. Proper trundown capabitity
4. Low gas pressure drop;
5. Minimum height;
6. Higher cross-mixing capabity.
4. Hualai liquid collector and re-distributor use:
If you need to draw off the liquid partially or totally from some height of the tower, chimney trays are used. But considering the high turbulence velocity of liquid in structured packing, chimney trays are recommended among two structured packing beds. Column internals play very important role in effective mass transfer performance. So they need to be designed carefully for both process and mechanical point. Meanwhile, the engineers put great effort into structured packing and random packing development in the recent years. The column internals include mist eliminators, feed pipes, distributors, re-distributors, support plates, bed limiters, collector trays, etc.
5. Hualai liquid collector and re-distributor production:
Welcome your iquiry to Hualai factory!
