Beijing Silk Road Enterprise Management Services Co.,LTD
People-oriented, good faith service, the pursuit of excellent quality.
Add to Cart
Co Knit Mesh Mist Eliminator 6BE Demister OEM Service Ss Glass Fiber
Co-knit mesh mist eliminator, which are used in removing droplets entrained in flow gas, is constructed from knitted wire mesh with a cellular structure. The knit mesh are made into a mesh pad with determinate thickness and diameter, through which the two phases liquid-gas or liquid-vapor are disengaged.
From the statistic data obtained both in laboratory tests and industrial applications, it shows that the proper designed mesh pad demister allows a separation of liquids carried by gas with efficiency reaching 99.9%.
Co-knit mesh of stainless steel and glass fiber mist eliminator Inquiry Table if Calculation Suggestions and Service are needed
| Please State your demister / mist eliminator application | |||||
| Operating data | |||||
| Gas | Max. gas volume flow (operating conditions) | M3/h | |||
| Gas density (operating condistions) | Kg/m3 | ||||
| Operating pressure | Bar (a) | ||||
| Operating temperature | ℃ | ||||
| Liquid | Liquid content | Kg/h | |||
| Liquid density | Kg/m3 | ||||
| Dynamic viscosity of the liquid | mPas | ||||
| Geometrical data | |||||
| Flow direction | Horizontal | ¨ | |||
| Vertical | ¨ | ||||
| Installed in | Column | ¨ | |||
| Pipe | ¨ | ||||
| Column diameter or dimensions | mm | ||||
| Opening for installation | Manhole | ¨ DN | |||
| Vessel flange | ¨ Size | ||||
| Requirements | |||||
| type of mist eliminator | Wire mesh demister | ||||
| Material | |||||
| Efficiency of separation | % | ||||
| Max. pressure drop | |||||
| Miscellaneous | |||||
Please pay attention to the Unit when refering to this sheet.
Mist Eliminator Applications:
Low pressure rectifying column:
The co-knit mesh mist eliminator increases the purification ratio, that enables a deep cut in residue oil to improve the quality of gas oil. The improved gas oil contains less carbon, asphalt and corrosive metals, increases decomposition capacity by the residue load in the regenerator, and maintains a higher contact reaction to produce a higher gasoline yield ratio.
Lubricant refinery tower:
The mesh demister increases production volume and yield ratio and improves production quality. As a result, the refining of solvent and white clay is practically rationalized.
Distilling equipment:
Improved performance can be obtained in equipment for processing asphalt, organic intermediate substances, fine chemicals, vegetable oil, tall oil, fatty acid, glycerin, lubricant, benzene and propane.
Evaporator:
The co-knit mesh mist eliminator prevents carryover of valuable products, can be appropriately used for boiler feed water or processes, and produces high quality condensate.
Steam drum:
Demister produces clean and dry solids of less than 0.5ppm and prevents water from flowing back into the turbine.
Absorption tower:
Effective for completely removing all types of flying and accompanying liquids such as absorption oil, glycol and amine dissolution and discharges clean and dry gas. This also improves process efficiency.
Knockout drum
Scrapper thin film evaporator
Separator container and others
MATERIAL OF CONSTRUCTION
Mesh and grids may be made from most metals and plastics i.e. SS304, 304L, 316, 316L, 321, 310S, 201, Duplex 2205, 316Ti, 904L, Monel, Nickel, Alloy 20, Copper, P.T.F.E., H.D.P.E., P.P., co-knit of 316L + PTFE, alloy 20 + PTFE, 304+PTFE, 904L + PTFE, 304+glass fiber, 316L + glass fiber, 904L + glass fiber, 316L+PP etc. and other metals, alloys or plastic which can be drawn or extruded.
